Illustrative photograph: a wall tile being set into adhesive
RENOVATION GUIDE · BY IVAN BODNAR
“My bathroom needs updating” is where most bathroom renovations begin. This guide covers what to work out first, which parts belong to licensed plumbers and electricians, and why the tiles and fittings are chosen after the room has been properly looked at, not before.
Written by Ivan Bodnar, independent home renovation specialist, Melbourne
START HERE
Cracked or drummy tiles, failing grout, water marks on a ceiling below, a shower that never quite drains, or simply a layout that no longer suits the household. Write it down in plain words. That list matters more than any picture from a magazine.
Replacing worn finishes on sound surfaces is a very different job from stripping a room back to the frame. Often you can’t tell which you need until someone checks what sits underneath the existing tiles.
Moving a shower, toilet, vanity or light point brings in licensed trades. Keeping fixtures where they are keeps the work simpler. Both are fine, but it’s worth knowing early which one you’re planning.
WHO DOES WHICH PART
Ivan doesn’t personally carry out licensed plumbing or electrical work. When a bathroom renovation needs it, he coordinates with appropriately licensed tradespeople, so you still have one point of contact. How that works.
IVAN BODNAR
Site assessment and advice
Removal and surface preparation
Levelling and setting out
Wall and floor tiling, grouting
Finishing and clean-up
Coordinating licensed trades
LICENSED TRADESPEOPLE
Plumbing: water supply, drainage, fixture connections
Electrical: lighting, power points, exhaust fans and heating
NOT OFFERED
Architectural design, engineering or other specialist professional services.
24-hour emergency repairs.
WHY THE ASSESSMENT COMES FIRST
A good renovation depends on what happens before the final finishes are installed. A large-format tile needs a flatter wall than a small one. A floor that needs re-levelling changes the preparation and sometimes the heights at the doorway. Existing water damage changes the scope altogether.
That’s why the right scope of work, materials and methods depend on the property’s condition and what an on-site assessment finds. Once Ivan has seen the room, he can explain what’s necessary, why he’d recommend a particular approach and what might affect the job. Then the choice of finishes is a practical one.
Even after an inspection, some things only appear once the old tiles come off. Concealed damage or changes to the agreed scope may affect the work and need further discussion. Read more about concealed damage.
Illustrative photograph
01
Describe the bathroom and what’s bothering you, ideally with a few clear photos or a short video. What to photograph.
02
Ivan personally reviews each enquiry and talks through your requirements with you.
03
Where a visit makes sense, Ivan arranges it, checks the surfaces and explains what the room needs.
04
The quote is based on what the assessment found, and arrangements are made directly with you. More on the process.
A SHORT CHECKLIST
✓ A plain list of what isn’t working
✓ Whether any fixtures or light points might move
✓ Photos of the whole room, plus close-ups of damage
✓ Your suburb in Melbourne
Then text Ivan on 0413 142 055, or use the enquiry form. If you’d like more detail first, see bathroom renovations or what happens before the first tile goes down.